|
The Sensor Controlled Relay can control the electrical
power to devices managed over the Internet.
With easy configuration and integration
with the sensorProbe product series. The Sensor Controlled Relay defines a new era in energy management.
The Sensor Controlled Relay is easily controlled
by any of AKCP's extensive selection of sensors.
The relay can provide automatic responses
to sensor alerts. This is useful, for example,
to switch on the fan when the room temperature
rises beyond the threshold level or to turn
on a light when the motion detector is triggered.
Setting up the Sensor Controlled Relay is easy with
its built in autosense feature and user friendly
web interface.
The Sensor Controlled Relay can also be controlled
via external computers using the included
snmp command line utilities either interactively
or programmatically. In addition the Sensor Controlled Relay can be controlled via the integrated
we interface on the sensorProbe.
The Sensor Controlled Relay provides 1 high-power
SPDT 5V relay with the maximum load up to
15A at 220 VAC. It includes Metal Oxide Varistors
(MOVs) and Snubber circuits to protect the
open contacts of the relays from the high
voltage spikes or noise transients. It monitors
the power & load and accepts a control
signal which is sent from the sensorProbe.
A simple, point and click web manager can
set link the Sensor Controlled Relay to a sensor.
When the sensor goes to the chosen state,
for example, High Critical, the Relay can
be made to Cycle, which will turn on and then
turn off the external device for the selected
period of time. In this case, when the sensor
goes High Critical, the automatic response
system will Cycle the relay for 20 seconds.
Users can easily change the fields in the
Relay Settings Menu according to their needs
using the dropdown list boxes.
The Sensor Controlled Relay with the automatic
response feature can give the users more flexibility
in responding to the environmental alerts.
Automatic response eliminates the need for
the user intervention during the alarm condition.
The Sensor Controlled Relay has built in 16Amp
circuit breaker and 15Amp fuse (380 VAC, 125
VDC) to give the double protection for the
external devices from possible damages by
electrical fault.
Status of The Sensor Controlled Relay is reported
by 4 LEDs on the board. Remote monitoring
of the status is available using SNMP traps,
web interface, e-mail and SMS.
Note: There are two versions of the sensor controlled relay, 110V input for
USA supply voltages, and 220V for EU supply voltages. If you are unsure about
which product to order, please contact us at support@akcp.com. See our price
list for ordering details.
|
