Find the specific position of water leaks over large area!
Ideal for detecting waterleaks in hard to see areas, such as under raised floors and false ceilings. The locateWater sensor will give you a precise location of the water leak so you can respond promptly to protect your enterprise resources from water damage.
This sensor comes fully assembled and includes the rope portion that is the water sensing cable, the non-sensing cable (from the rope to the sensing module) and the main sensing module. The sensing cable can be pre-ordered from a 10 foot minimum to any custom run length (in multiples of 10 feet) of up to 160 feet. The non-sensing cable comes in a standard 20 foot run length.
- Designed for specific location water detection
- Available in standard and custom lengths
- Own SNMP OID for monitoring across a network
- CAT5 sensor cable extendable to 100 feet
The specific location of water along the rope can be used to trigger alerts like e-mail, SMS, phone calls and SNMP traps. The sensor has its own SNMP OID so that it can be monitored over the network using any Network Management System.
Each locateWater sensor comes complete with a 5 foot sensor cable that connects the main sensing module to the securityProbes RJ-45 sensor ports, or you can use your own CAT5/6 LAN cable. This cable can be extened up to 100 feet or 30 meters
|Measurement Range||Wet or Dry (-20 degrees C- +60 degrees C)|
|Measurement Accuracy||Able to detect the presence of water at a specific location|
|Sensor Type||Patent pending, capacitance measurement technology|
|Power Consumption||Typical 125 mWatt, 25 mA|
|Communications Cable||RJ-45 jack to main sensor module using UTP CAT5 cable. Maximum extension cable length is 30 meters or 100 feet|
|Power Source||Powered by the sensorProbe, or securityProbe. No additional power needed. Both units autodetects the presence of the ropeWater sensor|
|Comes fully assembled and includes the rope portion that is the water sensing cable, the non-sensing area cable (from the rope to the sensing module) and the main sensing module|
|Sensing rope cable can be pre-ordered from a 10 foot minimum to any custom run length (in multiples of 10 feet) of up to 160 feet|
|Non-sensing cable comes in a standard 20 foot run length|