IO-digital8 sensor Header ImageIO-digital8 sensor – Specifications and Features
 
TitleDescription
Measurement range

  • Alarm or Normal
Communications cable

  • RJ45 jack to sensor using UTP Cat 5 wire, Maximum extension cable length 305m (1000 ft.) with approved low capacitance shielded cable or UTP
Sensor type

  • Open/closed or cycles contact switches
Input voltage range

  • 0 to 5 volts on each of the 8 dry contacts
Current Range

  • Can sink up to 20 mAmps on each of the 8 dry contacts
Measurement rate

  • Multiple readings every second
Power source

  • Powered by the securityProbe 5E. No additional power needed

  • Normal input voltage is settable under software on each of the 8 dry contacts

  • Normally open, normally closed is settable under software on each of the 8 dry contacts

  • Only compatible on AKCP securityProbe line of units

  • securityProbe 5E autodetects the presence of each dry contact on the IO-digital8

  • Connect up to 8 IO-digital8 sensors per each securityProbe 5E main unit and E-sensor8 expansion modules for a total of 64 dry contacts per box

  • Full autosense including disconnect alarm