Power Monitoring Sensor - The Power Monitor Sensor gives vital information and allows you to remotely monitor power eliminating the need for manual power audits as well as providing immediate alerts to potential problems

Power Monitoring Sensor

The Power Monitor Sensor gives vital information and allows you to remotely monitor power eliminating the need for manual power audits as well as providing immediate alerts to potential problems

The AKCess Pro Power Monitor Sensor is specifically designed to be used with AKCess Pro’s securityProbe 5E.

  • Product Code: PMS
  • MSRP Price: End Of Life

The AKCess Pro Power Monitor Sensor gives vital information and allows you to remotely monitor power eliminating the need for manual power audits as well as providing immediate alerts to potential problems. The AKCess Pro Power Monitor Sensor is specifically designed to be used with AKCess Pro’s securityProbe 5E.

It has been integrated into the securityProbe 5E’s web interface with its own “Power management” menu, allowing up to 64 Power Monitor Sensors to be connected and set up on a single securityProbe 5E. Data collected over time using the Power Monitor Sensor can also be viewed using the built in graphing tool. Combining this durable Power Monitor Sensor with the securityProbe 5E creates an IP-enabled power monitoring capability to monitor and measure:

  • Total Active Power
  • Total Reactive Power
  • Active Power
  • Reactive Power
  • Phase Line Voltage
  • Phase Line Current
  • Power Factor

Create alert notifications using the Rich Notification Suite and choose any combination of these alert options:

  • SMS
  • Email
  • MMS
  • Telephone call
  • Fax
  • SNMP
  • Relay switch automates corrective action.

This four-wire sensor is encased in sturdy white plastic and mounts on a 35mm DIN rail. Order it for 110 or 220 power supplies. It functions with single- or three-phase circuits, and meets international standards for active and reactive energy – IEC 62053-21 and IEC 62053-23, respectively.

Note: Installation should be performed by licensed electricians familiar with applicable codes and regulations.

Specifications

Direct connected single
phase meter
Direct connected three
phases meter
Transformer connected
three phases meter
Accuracy Class Class 1 Class 1 Class 0.5s
Voltage(V)
Rated Voltage (Un) 100 220-240 3×57-288/100-500 3×57-288/100-500
Voltage range -23%t~+20%Un Wide range Wide range
Current(A)
Basic current 5 5 1
Maximum current 100 100 10
Starting current(mA) 0.2%*Ib 0.2%*Ib 0.2%*Ib
Current circuits consumption (VA) <1.1 <1.1/phase <0.05/phase
Voltage circuits consumption (W) <0.3 <0.3/phase <0.3/phase
Frequency(Hz) 50/60 50/60 50/60
Standards IEC 62052-11
IEC 62053-21
IEC 62052-11
IEC 62053-21
IEC 62052-11
IEC 62053-22
Temperature range(°C)
Operating Temperature -25 to +70 -25 to +70 -25 to +70
Storing Temperature -40 to +75 -40 to +75 -40 to +75
Pulse output
External pulse voltage(V)DC 5-40 5-40 5-40
Max. current (mA) 100 100 100
Pulse length (ms) 100 100 100
Standard IEC62053-31(SO) IEC 62053-31(SO) IEC 62053-31(SO)
LED
Pulse frequency (imp/kWh) 1000 1000 1000
Pulse length (ms) 40 40 40
Communication
Type Optical port / RS485 Optical port / RS485 Optical port / RS485
Standard IEC 62056-21
Modbus
IEC 62056-21
Modbus
IEC 62056-21
Modbus
Dimensions(L*W*H) (cm) 90*75*54 122*90*54 122*90*54

Request a Quotation

Request a quotation from one of our experienced sales staff today.

OrvillegevaPower Monitoring Sensor