Single Port Temperature and Humidity Sensor (Water Resistant) - Water resistant dual sensor for damp environments

Single Port Temperature and Humidity Sensor (Water Resistant)

Water resistant dual sensor for damp environments

This water resistant version of the AKCess Pro Single Port Temperature and Humidity Sensor is designed for outdoor usage, or indoor area that are subject to water or moisture (eg. greenhouses).

  • Product Code: THSW15
  • MSRP Price:
  • Powered by the base unit

In situations where both temperature and humidity can be critical you can keep up to speed on the current conditions using this sensor. Combining temperature and humidity into the one sensor frees up an additional intelligent sensor port on your base unit.

Setup is simple with the sensorProbe and securityProbe autosense function. Once plugged into the intelligent sensor port the base unit automatically detects the sensors presence and configures it for you.

All you need to do is set your thresholds for low and high warning and critical parameters. The built in graphing function of the base unit gives you a pattern of temperature or humidity trends over time.

Specifications
Temperature

Measurement Range Celsius -40°C to +75°
Measurement Resolution Celsius 1°C
Measurement Accuracy Celsius Maximum ±2.3 at -40ºC, minimum ±0.4 at +25ºC and ±1.7 at +75ºC
Measurement Range Fahrenheit -40°F to +167°F
Measurement Resolution Fahrenheit 1°F increments
Measurement Accuracy Fahrenheit Maximum ±4.1 at -40ºF, minimum ±0.9 at +25ºC and ±4 at +167ºF

Humidity

Measurement range 0 to 100% Relative humidity
Resolution 1%
Accuracy at 25°C ±3%
Communications cable UTP Cat 5 cable
Power source Powered by the sensorProbe. No additional power needed
Power Consumption Typical 7.25 mWatt, 1.45mA
Sensor element wettable without damage
sensorProbe auto detects the presence of the dual sensor
Up to 2 dual sensors per sensorProbe2, 8 per sensorProbe8 and securityProbe
  • Monitors temperature and humidity on a single intelligent sensor port
  • Designed for use in wet/damp/outdoor environments
  • Own SNMP OID for data collection via a network
  • Temperature measurement from -40ºC – +75ºC
  • Relative Humidity measurement from 0% – 100%
  • Powered by base unit, no additional power needed
Our Single Port Temperature/Humidity Sensor is calibrated using dedicated equipment which is calibrated according to ISO/IEC 17025 and calibrated by comparison against natural standards, natural physical constants, consensus standards, or by ratio type measurements using self-calibrating techniques.

Standards incorporated to establish this comparison are NIST and NPL traceable.
Our Single Port Temperature/Humidity Sensor comply with RoHS and WEEE requirements. There is no substance to be declared.


Request a Quotation

Request a quotation from one of our experienced sales staff today.

AKCP AdministratorSingle Port Temperature and Humidity Sensor (Water Resistant)