Secure and Protect your computer cabinet assets with the AKCP RFID Swing Handle Cabinet Lock
An RFID proximity card swing handle cabinet lock will secure both front and rear doors of your cabinet. Designed with a universal fit, it can be attached to most industry standard cabinets.
Manage access privileges, schedules, generate reports and receive alerts through AKCess Pro Server management software. Access decisions are made locally at the swing handle.
Many cabinets have removable side panels. Protect and monitor these by adding an optional 4x security sensors and be alerted when side access panels are removed.
Use cameras integrated with AKCess Pro Server to monitor your cabinet and synch access events together with video to verify who accessed and when.
The AKCP RFID Swing Handle Lock is easy to install to most industry standard cabinet. In the video below you will see how simple the process is.
|Supported Cards :||EM-Card, 125Khz Proximity cards, 26bits |
|Proximity Reading Range :||0-3cm|
|Access Control :||Up to 500 users|
|Ambient Temperature :||-25°C to 75°C|
|Ambient Humidity :||10%-90%|
|Built-in :||RFID Antenna, Motor|
|Fail-Secure :||Integrated key lock for manual override|
|LED Indicator :||RGB Color LED : Lock status and Access Control status|
|Locking Control :||Remote lock and unlock from the sensorProbe+ unit via Web Interface, SNMP or AKCess Pro Server |
Calendar enabled locking and unlocking control
Notification locking and unlocking control
|Communications cable :||RJ-45 jack to sensor using UTP CAT5e/6 cable|
|Power source :||Powered by the sensorProbe+ familiy units. No additional power needed|
|Working Voltage :||DC 5V|
|Power Consumption :||Typical 0.35 mWatt, 70 mA |
Peak 1.75 mWatt, 350 mA
|Communication Distance :||Run length is 16 feet (5 meters) with approved low capacitance shielded cable or UTP|
|Important Note:||sensorProbe+ units auto detects the presence of the RFID Swing Handle Lock sensor|
|Up to 2 RFID Swing Handle Lock sensors per sensorProbe+ unit|
|– The RFID Swing Handle Lock sensor is only compatible with the sensorProbe+ platform units. |
– When plugging the first time or after upgrading a sensorProbe+ unit, the sensor’s firmware might be upgraded by the unit and not be available right away.