Home » Locate Rope Water Sensor

Environmental Monitoring

Locate Rope Water Sensor

Detect Water. Locate the Leak

Identify where the leak is first detected along the sensing rope.

LWSC locate rope water sensor
humidity icon

Water Detection

When water is in contact with the sensing cable 

rope water sensor icon

Leak Location

Detect where the leak is first detected along the cable

Locate rope water sensor icon

Custom Lengths

Define the length of rope water sensing cable you need

Alarm Bell icon

Remote Alerts

Receive notifications via email, SMS, SNMP Traps and more

raised access floor open
Raised Floors

Monitor for leaks underneath raised floors where they are not immediately obvious

ceiling void open
Ceiling Voids

HVAC and water pipes often run in unseen ceiling voids

plant room
Equipment Perimeters

Run sensors around equipment such as pumps, compressors, condensers

Ideal for detecting water leaks in hard to see areas, such as under raised floors and false ceilings. The Locate Rope Water sensor will give you a precise location of the water leak so you can respond promptly to protect your enterprise resources from water damage.

This sensor comes fully assembled and includes the rope portion that is the water sensing cable, the non-sensing cable (from the rope to the sensing module) and the main sensing module. The sensing cable can be pre-ordered from a 10 foot minimum to any custom run length (in multiples of 10 feet) of up to 160 feet. The non-sensing cable comes in a standard 20 foot run length.

Want to monitor for leak only?
Explore the rope water sensor here.

leak location diagram

The specific location of water along the rope can be used to trigger alerts like e-mail, SMS, phone calls and SNMP traps. The sensor has its own SNMP OID so that it can be monitored over the network using any Network Management System.

Each Locate Rope Water sensor comes complete with a 5 foot sensor cable that connects the main sensing module to the AKCP remote monitoring base unit RJ-45 sensor ports, or you can use your own CAT5/6 LAN cable. This cable can be extended up to 100 feet or 30 meters.

  • Designed for specific location water detection
  • Available in standard and custom lengths
  • Own SNMP OID for monitoring across a network
  • CAT5 sensor cable extendable to 100 feet

Non-locate type rope water sensors are available here.

Measurement TypeWet or Dry
Closest location detection
Measurement RateMultiple readings every second
 Able to detect the presence of water at specific location
IndicationLED for Status
Operating Temperature-20 °C~60 °C
4 °F~140 °F
Pull Force LimitNot to exceed 50 lb
Bend Radius2 in. (50 mm) minimum
PressureLoads greater than 20 lb (9 kg) per linear inch at 20°C (68°F) may immediately trigger an alarm
  
Interface 
Communications CableRJ-45 jack to sensor using UTP Cat 5 wire
Communications Cable Max. length

The Locate Rope Water Sensor can be extended from the RJ-45 Intelligent Sensor ports on the base units up to 100 feet, or 30 meters using standard CAT5/6 LAN cable.
Comes fully assembled and includes the rope portion that is the water sensing cable, the non-sensing area cable (from the rope to the sensing module) and the main sensing module
Sensing rope cable can be pre-ordered from a 10 feet minimum to any custom run length (in multiples of 10 feet) of up to 160 feet or 50 meters.

Non-sensing cable comes in a standard 20 feet run length.

Power SourcePowered by the controller unit. No additional power needed
 Full autosense including disconnect alarm
Power ConsumptionTypical 125 mWatt, 25 mA
Dimensions56 x 55 x 33.3 mm
MountingDIN rail mounting
Screw mounting
Important NoteAKCP does not recommend the locateWater Sensor to be placed on a conductive surface. 
Sensor count1
Locate Rope Water Sensor

Schedule a Demo With Us

Find out how we can Protect, Monitor and Optimize your Data Center

AKCP data center monitoring sensors

Interested in our FREE Data Center PUE check?

Contact us below and schedule a 15 minute consultation

Thank you for your submission!

One of our team members will reach out within 24 hours.

Contact AKCP