E-Sensor8 - An 8 Port Intelligent Sensor Expansion Board

E-Sensor8

An 8 Sensor Port Expansion Board

The E-sensor8 is an expansion module that has 8 RJ-45 intelligent sensor ports and is connected to any of the RJ-45 expansion ports located on the front panel of the securityProbe base units.

  • Product Code: E-Sensor8

The E-sensor8 is an expansion module that has 8 RJ-45 intelligent sensor ports and is connected to any of the 4 RJ-45 expansion ports located on the front panel of the securityProbe 5E base units. They are connected using standard CAT5 LAN cable.

The E-Sensor8 may also be daisy chained using the E-Out/E-In ports on other expansion boards.

Complete Connectivity

Any sensor within AKCP’s complete line of intelligent sensors can be connected to the intelligent sensor ports which are located on the rear of the unit. 16 LED’s on the front provide each sensors visual condition, 8x red for status and 8x green for online.

The expansion boards can be daisy chained together using the units input, or E-in and output, E-out port. These also are RJ-45 ports and use standard CAT5 cable.

These E-Boards can be extended from the securityProbe 5Es base unit or from each other up to 300 meters, or roughly 1000 feet.

Specifications

Dimension Size 8.5″ x 5.43″ x 1.80″
Weight 0.8 Kg
Expansion Port 2x RJ-45 Expansion Ports
115.2K bps Data Transfer Rate 
Mounting 1U Rack Mount Standard
Rack mount brackets included
Compatible with AKCP’s DIN and rack mount trays
Power External 7.0 – 9 VDC 3A Power Adapter
Input Voltage and Current ratings : 100V~240V – 1A
Typical 5.025 Watt, 0.67A
Status Indication LED indication for power
LED for Expansion port connectivity
LED for sensor online and threshold status
Components Manufactured using highly integrated,low power surface mount technology to ensure long term reliability.
Operating Environment Temp : Min. -35° C – Max. +55° C
Humidity : Min. 20% – Max. 80% (Non-Condensing)
MTBF 400,000 Hours
   
Inputs 8x RJ-45 ports for connecting AKCP sensors
1x RJ-45 expansion module input (E-in)
Outputs Configurable output signals (0VDC/5VDC) on any of the 8 RJ-45 sensor ports
1 RJ-45 expansion module output (E-out)
E-Modules * Daisy chain multiple E-modules including E-sensor8 and E-opto16 combined
* Uses standard RJ-45 connections and CAT5 LAN cable
* Maximum extension cable run length: 300 meters (1000 feet)
* Compatible with AKCPs complete line of intelligent sensors
* Connect up to 500 AKCP intelligent sensors to one securityProbe5ES
* Connect up to 150 AKCP intelligent sensors to one sensorProbe+ (up to 4 expension units)
Daisy Chainable

The E-Sensor8 may also be daisychained using the E-Out / E-In Ports on other expansion boards.

The E-modules can be extended up to 300 meters from the securityProbe 5E base unit. There is no limit to how many E-modules can be connected to a single securityProbe 5E. It depends only on the number of sensors connected. A maximum of 600 data points can be monitored by the securityProbe 5E base unit.

 

daisy-chained-example-resized

OID’s for checking the Expansion Boards and securityProbe 5E

The OID will start with .1.3.6.1.4.1.3854.2 for checking the sensors on the expansion modules including the E-Sensor8.

This SNMPwalk command .1.3.6.1.4.1.3854.2.3.1.1 can be used for checking all of the sensors on the securityProbe 5E.

This SNMPwalk command .1.3.6.1.4.1.3854.2.2.1.1 can be used for returning the status of the expansion modules.



Request a Quotation

Request a quotation from one of our experienced sales staff today.

AKCPE-Sensor8