Pipe Pressure Sensor

Upgrade Your Analog Gauges
Wireless Tunnel™ Radio
Battery or Powered
IP66 Enclosure

Wireless Tunnel™ Radio Sensor based on LoRa™ Technology

Pipe Pressure Monitoring

Digital pressure gauge for monitoring all kinds of liquids and gasses. Battery Powered, Wireless Tunnel™ Technology. Remote monitoring via the internet, alerts and alarms when pressures are out of pre defined parameters. Upgrade existing analog gauges. Retain your existing gauges with our installation kit. Easy setup and pairing with AKCP Wireless Tunnel™ gateway.

Sensor Features
  • 4x AA Batteries, with 10 year battery life*
  • 5VDC or 12VDC powered
  • IP66 Waterproof enclosure
  • Multiple mounting options

Wireless Tunnel™ Monitoring Solutions

*10 year battery life based on data broadcast once every 15 minutes at an ambient temperature of 25°C.

Pressure Sensor Only

KCP Wireless Tunnel™ pressure sensors monitor and alert when pressure is outside of pre defined parameters. The sensor can be mounted in a variety of ways to suit your own requirements.

Sensor Mounted
Pipe Mounted
DIN Rail Mounted
Pressure Sensor With Gauge

Use AKCP pressure sensors for remote monitoring alongisde your existing analog gauges. Mounting of the sensor matches your installation requirements.

Pipe Mounted
Sensor Mounted
DIN Rail Mounted

Status Indication
LED indication for
– Mode
– Status
Manufactured using highly integrated, low power surface mount technology to ensure long term reliability.
Operating Environment
Temperature : Min. -35° C – Max.80° C
Humidity: Min. 20% – Max. 80% (Non-Condensing)
LoRa (R) Radio
Regional plans
– EU868 : 863~868Mhz, Max TX Power +14dBm, Duty Cycle 1%
– US915: 903~915Mhz, Max TX Power +17dBm
– AS923 : 920~925Mhz, Max TX Power +14dBm, Duty Cycle 1%
– KR920 (Korea) : 922~923Mhz, Max TX Power +14dBm, Duty Cycle 1%
– IL917 (Israel) : 915~917Mhz , Max TX Power +14dBm, Duty Cycle 1%
FCC Part15C, CE EN300220-2
Micro-USB port for powering, adding and upgrading to the Gateway base unit
76 x 77 x 120mm
Wall hanging, DIN rail, Pipe Clamp
Power source
4xAA batteries or via micro-USB port
Power Consumption
Average 12 mWatt, 10uA in Idle, Up to 10 years of battery life
Sensor Type
Piezo resistive pressure sensor
Measurement Range
0-1MPa (0-10 Bar, 0-145 PSI)
Measurement Resolution
1KPa (0.01 Bar, 0.15 PSI)
Measurement Accuracy
Maximum ±0.5% FS
Total Error
±1% FS
Gateway sensor count
4 (3 + 1)

Request a Quotation

Request a quotation from one of our experienced sales staff today.

AKCPWireless Pipe Pressure Sensor