Single Port Temperature and Humidity Sensor
Dual sensor, 2 sensors on one port
Combining temperature and humidity into the one sensor frees up an additional intelligent sensor port on your base unit.
- Product Code: THS01
- MSRP Price: $90.00 USD
- 2 variations available
- Powered by the base unit
In situations where both temperature and humidity can be critical you can keep up to speed on the current conditions using this sensor. Combining temperature and humidity into the one sensor frees up an additional intelligent sensor port on your base unit.
- Monitors temperature and humidity on a single intelligent sensor port
- Own SNMP OID for data collection via a network
- Temperature measurement from -40ºC – +75ºC
- Relative Humidity measurement from 0% – 100%
- Powered by base unit, no additional power needed
Setup is simple with the sensorProbe and securityProbe autosense function. Once plugged into the intelligent sensor port the base unit automatically detects the sensors presence and configures it for you.
All you need to do is set your thresholds for low and high warning and critical parameters. The built in graphing function of the base unit gives you a pattern of temperature or humidity trends over time.
|Measurement Range Celsius :||-40°C to +75°C|
|Measurement Resolution Celsius :||1°C|
|Measurement Accuracy Celsius :||Maximum ±2.3 at -40ºC, minimum ±0.4 at +25ºC and ±1.7 at +75ºC|
|Measurement Range Fahrenheit :||-40°F to +167°F|
|Measurement Resolution Fahrenheit :||1°F increments|
|Measurement Accuracy Fahrenheit :||Maximum ±4.1 at -40ºF, minimum ±0.9 at +25ºC and ±4 at +167ºF|
|Measurement range :||0 to 100% Relative humidity|
|Accuracy at :||25°C ±3%|
|Communications cable :||UTP Cat 5 cable|
|Power source :||Powered by the sensorProbe. No additional power needed|
|Power Consumption :||Typical 7.25 mWatt, 1.45mA|
|Sensor element wettable without damage|
|sensorProbe auto detects the presence of the dual sensor|
|Up to 2 dual sensors per sensorProbe2, 8 per sensorProbe8 and securityProbe|
|Important Note:||The fixed one foot type or TMP01 and THS01 are not designed to be extended. If you need to extend these sensors then you need to use the TMP00 or THS00 (remote type).We also do not recommend you trying to connect any of our AKCP sensors including the temperature and dual temp humidity sensors though patch panels or using the RJ-45 couplers to extend them. Please see the temperature sensors product manual or FAQ in our knowledge base for more details regarding this.|
Standards incorporated to establish this comparison are NIST and NPL traceable.
Our Single Port Temperature/Humidity Sensor comply with RoHS and WEEE requirements. There is no substance to be declared.