Modbus to SNMP Adapter
Convert the MOD/EXP port on the sensorProbeX+ and sensorProbe2+ from an RJ45 into 2 wire serial cable.
sensorProbeX+ comes equipped with an RS485 Modbus and Expansion port. When using this RJ45 port to connect Modbus appliances, the Modbus to SNMP Adapter makes it easier to connect a 2 wire serial bus cable to the RJ45 port, converting the RJ45 connector into a 3 pin terminal block connection.
- Product Code: MOD-A
|Connector||3 pin phoenix connector : A+, B+, GND|
|Electrical||no galvanic isolation|
|Components||Manufactured using highly integrated, low power surface mount technology to ensure long term reliability.|
|Operating Environment||Temperature : Min. -35° C – Max.80° C
Humidity: Min. 20% – Max. 80% (Non-Condensing)
|Communications cable||RJ-45 jack to sensor using UTP CAT5e/6 cable|
|Power source||Powered by the controller unit. No additional power needed|
|Power Consumption||Typical 0 mWatt, 0 mA|
|Maximum Cable Length||The Modbus Adaptor can be extended from the RJ-45 Intelligent Sensor ports on the base units up to 1800 feet, or 550 meters using standard CAT5/6 LAN cable|
|Dimensions||56 x 55 x 33.3 mm|
|Mounting||DIN rail mounting