SNMP Temperature Sensor
Temperature Sensor - Designed to record accurate temperature data it is ideal for giving advanced warning of temperature fluctuations that can potentially damage sensitive equipment

SNMP Temperature Sensor

Remote Monitoring with the AKCP Temperature Sensor. Ideal for Data Center Monitoring or anytime a temperature sensor is needed. Network-enabled SNMP temperature sensor with calibration check.

Designed to record accurate temperature sensor data it is ideal for giving advanced warnings of temperature fluctuations that can potentially damage sensitive equipment

The AKCP Temperature Sensor is compatible with the sensorProbe+ and securityProbe platforms.

  • Product Code: TMP01-NIST2 / NIST3
    Use Code TMP00-NIST2 / NIST3 for extendable length sensors.
  • NIST2 sensors with calibration check, NIST3 with calibration check and failover sensor
  • Powered by the base unit
SNMP Temperature Sensor Server Rack

AKCP Temperature Sensors are easily installed using the included free sensor clips.

  • Added Protection
    The stainless steel tubing helps to protect the temperature sensor from everyday use in busy server room environments.
  • Water-Resistant Sensor Housing
    The stainless steel tube reduces the risk of sensor failures caused by water damage.
  • Easier To Install
    Temperature sensors ship with cables and temperature sensor clips for easy installation in server cabinets.
  • Reduced Complexity
    AKCP can provide custom-length cables suitable for any installation. Ask our sales team about custom sensor cables today!

The AKCP temperature sensor is compatible with all of our sensorProbe+ and securityProbe series base units. Designed to record accurate temperature data it is ideal for giving advanced warnings of temperature fluctuations that can potentially damage sensitive equipment. This advance notification can protect your data and systems from catastrophic events.

  • Semiconductor, microprocessor-controlled type temperature sensor
  • Can be extended up to 165ft (50m) with standard CAT5 cable
  • Own SNMP OID for data collection over a network
  • 0.5ºC resolution

Setup is simple with the sensorProbe+ and securityProbe auto-sense function. Once plugged into the intelligent sensor port the base unit automatically detects the presence of the sensor and configures it for you. All you need to do is set your thresholds for low and high warning and critical parameters. The built-in graphing function of the base unit gives you a pattern of temperature trends over time.

For those who require an industrial-strength temperature sensor for extremes of high or low temperatures, we recommend the AKCP Thermocouple sensor or the Ultra Cold Temperature Sensor.


Measurement Range -55°C to +75°C
-67°F to +167°F
Measurement Resolution securityProbe and sensorProbe+ series (NIST2) sensorProbe+ (NIST3)
0.1°C increments
0.2°F increments
Measurement Accuracy sensorProbe+ series and securityProbe series
±0.2°C accuracy from -10°C to +75°C
±0.5°F accuracy from +14°F to +167°F
Calibration NIST traceable Calibration Certificate (TMPxx-NIST2 / 3)
Built-in calibration check alerts when the sensor needs re-calibration
NIST3 with calibration check and failover
Communications cable RJ-45 jack to sensor using UTP CAT5e/6 cable
Power source Powered by the base units. No additional power needed
Power Consumption Typical 7.25mWatt, 1.45mA
Maximum Cable Length Run length is 165 feet (50 meters) with low capacitance shielded cable or UTP

40ft version only compatible with first 4 sensor ports of SP1+ / SP2+ / SPX+

Sensor type Semiconductor, microprocessor controlled
Dimensions 56 x 55 x 33.3 mm
Mounting DIN rail mounting
Screw mounting
Sensor count (TMPxx-NIST2) 2
Sensor count (TMPxx-NIST 3) 3
Important Note The fixed one-foot type or TMP01 is not designed to be extended. If you need to extend these sensors then you need to use the TMP00 (remote type). We also do not recommend you try to connect any of our AKCP sensors including the temperature and dual temp humidity sensors through patch panels or using the RJ-45 couplers to extend them. Please see the temperature sensors product manual or FAQ in our knowledge base for more details regarding this.
Compatibility NIST2 compatible with sensorProbe+ and securityProbe series / NIST3 compatible with sensorProbe+ only
Sensor is available in 2 variations:

Fixed length with 1ft of cable attached

Variable length. Ships with free 5ft CAT5 cable, user can extend up to 900ft.

Example Installations

sensorProbe Temperature Deployment

sensorProbe Temperature Sensor Deployment

sensorProbe8 temperature sensor deployment

sensorProbe8 Temperature Sensor deployment

securityProbe temperature sensor deployment

securityProbe Temperature Sensor deployment

View Separately
View Separately

Request a Quotation

Request a quotation from one of our experienced sales staff today.

AKCPSNMP Temperature Sensor